Grubinst Gui.exe

CLICK HERE ->>->>->> https://urlca.com/2t7xNY

To install grub4dos to MBR via Windows XP/2000 - download grubinst/grubutil package from here (or here). Grubinst.exe is a command line tool however a Graphic User Interface (GUI) is included in the download. Check the disk number allocated to the device you intend to install the grub4dos MBR to - use Windows Disk Management console (type C:\Windows\System32\diskmgmt.msc [ENTER] at a command prompt or in a RUN box). Installing to the wrong disk could result in Windows not booting so be careful. To install to MBR of disk:0 use command C:\Grub4dos\grubinst.exe (hd0); to install to MBR of disk:1 use command C:\Grub4dos\grubinst.exe (hd1); etc.

Using the Grubinst package, it is also possible to install Grub4dos code to the partition boot sector. Use command syntax grubinst.exe -p=n [device] or grubinst.exe --install-partition=n [device] (where n = partition number, starting from 0 for first partition. e.g. grubinst.exe -p=0 (hd0). Alternatively, use command grubinst.exe (hd0,0). grldr must be copied to the partition on which the bootsector was installed, and the partition must be active.

Use instead the DOS version of grubinst tool with command syntax grbins16.exe -p=n [device] or grbins16.exe --install-partition=n [device] (where n = partition number, starting from 0 for first partition. e.g. grbins16.exe -p=0 (hd0).

Basically, the goal is to install the grub4dos loader to the MBR of the usb drive and copy its program/configuration files to the drive's root. To do this, you download grub4dos (the program) and grubinst (a utility to add the program's loader to a MBR).

To install grub4dos to MBR via Windows XP/2000 - download grubinst/grubutil package (see here). grubinst.exe is a command line tool however a Graphic User Interface (GUI) is included in the download. Check the disk number allocated to the device you intend to install the grub4dos MBR to - use Windows Disk Management console (type C:\Windows\System32\diskmgmt.msc [ENTER] at a command prompt or in a RUN box). Installing to the wrong disk could result in Windows not booting so be careful. To install to MBR of disk:0 use command C:\Grub4dos\grubinst.exe (hd0); to install to MBR of disk:1 use command C:\Grub4dos\grubinst.exe (hd1); etc. See here for a list of grubinst.exe commands.

Using the Grubinst package, it is possible to install Grub4dos code to the partition boot sector. Use command syntax grubinst.exe -p=n [device] or grubinst.exe --install-partition=n [device] (where n = partition number, starting from 0 for first partition. e.g. grubinst.exe -p=0 (hd0). Alternatively, use command grubinst.exe (hd0,0). grldr must be copied to the partition on which the bootsector was installed, and the partition must be active.

Hey, I just bought a Patriot X-Mini II and for some reason it wont let me install grub with the grubinst_gui program. I tried with a different [small] flash drive and it worked perfectly, but I can't get my new drive to boot from usb. I noticed when I try to install to the x-mini, it automatically checks the "Floppy Image" box. I tried with it both on and off, and it still gives me the same error when I try to boot from it [Disk error]. I also noticed that where it lets you choose the part [Parts List], it only has "Whole Disk (FAT32)" when on the other drive it had "Whole Disk (MBR)" and then the drive partition. Does anyone know how I could get this drive bootable? 2b1af7f3a8